Single-Disc Machine单擦机
OEM/ODM Available — 支持 OEM/ODM — EV-D17-175
Control the Surface —
Not Just the Speed
控制地面——
而非仅仅转速
High torque. Stable output. Designed for precise floor treatment, not uncontrolled rotation.
大扭矩，稳定输出。为精确地面处理而设计，而非失控旋转。
- ✓17" · 175 RPM · 1,200 W17英寸 · 175 RPM · 1,200 W
Standard workhorse for daily cleaning and polishing日常清洁与抛光的标准主力机型
- ✓All-Steel Planetary Gear全钢行星齿轮
Hardened steel — disclosed specification, not a black box硬化钢——规格透明披露，非黑箱配置
- ✓Gear Drive — IP54 Sealed齿轮传动——IP54密封
No belt slippage. Mechanical relay control.无皮带打滑。机械继电器控制。
Why Floor Treatment Often Fails为什么地面处理经常失败
Uneven pressure and unstable rotation cause costly surface damage.压力不均与转速不稳，导致地面损伤。
Unstable Rotation转速不稳
Belt-driven machines lose torque under load.皮带传动机器在负载下扭矩衰减。
Surface Damage地面损伤
Wrong pad + uncontrolled speed = burn marks and irreversible damage.错误垫片+失控转速=烧痕与不可逆损伤。
Speed Is Not the Solution转速不是解决方案
Higher RPM does not mean better results. What matters is controlled torque — not maximum speed.更高的RPM不等于更好的结果。真正重要的是受控扭矩——而非最高转速。
Speed vs Torque.转速与扭矩。
| High Speed Machines高速机器 | ELVONIS EV-D17-175 |
|---|
| Surface overheating — burn marks地面过热——烧痕 | Controlled torque output受控扭矩输出 |
| Unstable contact — belt slippage接触不稳——皮带打滑 | All-steel planetary gear全钢行星齿轮 |
| Operator-dependent results效果靠操作员 | 175 RPM — repeatable performance175 RPM——可重复性能 |
| Higher damage risk损伤风险高 | Controlled surface treatment受控地面处理 |
Engineered for Torque Stability为扭矩稳定性而设计
Gear System齿轮系统
All-Steel Planetary Gear全钢行星齿轮
Hardened steel. 10,000+ hour lifespan. Disclosed spec.硬化钢，10,000+小时寿命，规格透明。
Weight Distribution配重分布
Balanced Chassis平衡底盘
Optimized weight for stable ground contact.优化配重，确保稳定接地。
Low-Speed High Torque低速高扭
175 RPM — Standard Polish175 RPM——标准抛光
Ideal for daily scrubbing and polishing.适合日常清洗与抛光作业。
Transmission System传动系统
Gear Drive — IP54 Sealed齿轮传动——IP54密封
All-metal gear drive. Mechanical relay control.全金属齿轮传动，机械继电器控制。
Pad Selection Determines Results垫片选择决定最终效果
Black Pad黑色垫片
175 RPM
Heavy-duty stripping. Removes old wax and coatings.重型起蜡。去除旧蜡与涂层。
Red Pad红色垫片
175 RPM
Daily scrubbing. Removes scuff marks without damaging surface.日常清洗。去除擦痕而不损伤地面。
White Pad白色垫片
175 RPM
Polishing and high-gloss finishing. For marble, terrazzo, vinyl.抛光与高光泽饰面。适用于大理石、水磨石、PVC。
Diamond Pad金刚石垫片
175 RPM
Stone restoration. Progressive grits for grinding and polishing.石材翻新。渐进式粒度用于研磨与抛光。
Where the EV-D17-175 FitsEV-D17-175 适用场景
Stone Floors — Marble, Terrazzo, Granite石材地面——大理石、水磨石、花岗岩
Restoration, crystallization, and polishing on stone surfaces.石材地面的翻新、晶化与抛光。
Hotels & Luxury Retail酒店与高端零售
High-gloss finishing with repeatable results every shift.高光泽饰面效果，每班结果可重复。
Commercial Buildings商业建筑
Daily scrubbing and polishing at 175 RPM — no extra machines needed.175 RPM 日常清洗与抛光，无需额外设备。
Industrial Sites工业场所
Heavy-duty stripping of old coatings and sealants.重型旧涂层与密封剂剥离。
If Something Needs Replacing当需要更换零件时
→ Drive Pads→ 驱动盘/垫All standard sizes — in stock globally. No proprietary lock-in.全标准尺寸——全球现货。无专属锁定。
→ Motor→ 电机Standard AC induction — no carbon brushes to wear out.标准交流感应电机——无碳刷磨损。
→ Gear System→ 齿轮系统All-steel planetary — standard metric pitch. Disclosed specification.全钢行星齿轮——标准公制齿距。规格透明披露。
→ Control System→ 控制系统Mechanical relay — IP-sealed. No PCB, no board to burn out.机械继电器——IP密封。无PCB，无烧板风险。
Specifications That Matter关键规格参数
Disc Diameter底盘直径
17 inch (430 mm)
Gear System齿轮系统
All-Steel Planetary全钢行星齿轮
Control System控制系统
Mechanical Relay — IP54机械继电器 — IP54
* Standard configuration. Custom setups available.* 标准配置。可定制方案。
Built for Distributors为经销商而生
◆ We do not compete with our partners我们不与合作伙伴竞争
◆ We do not sell into your accounts我们不向您的终端客户直销
◆ Stable supply, predictable batches供应稳定，批次可预期
Start with One Unit. Test It. Then Scale.从一台试起，验证后规模化。
Our engineering team reviews every inquiry and tells you exactly what's inside.我们的工程团队审核每一份询盘，并告知您机器的内部配置。
Direct WhatsApp SupportWhatsApp 专线支持
